BlocSilver® EMF Shielding Tent

The EMF tent is 165cm high, lightweight and compact.
The tent weighs less than 2 kilos, including the two poles and a carry case.
Setting up the tent is simple and can be done in ten minutes or less
The tent comes with a storage bag and carry-case, so you can take it anywhere.
You can use the tent at home, easily move it to another bed and even travel with it.
Take the tent with you when staying in hotels or visiting friends and family.

Compact
Easy to setup and folds down into a carrycase
Includes an integrated bed mat for a complete Faraday cage.

Superior shielding
Made from powerful BlocSilver® fabric.
Outstanding shielding properties against EMF and RFR.

Innovative fabric
BlocSilver® canopies are breathable, lightweight and antibacterial.
Comfortable sleep conditions and subtle aesthetic.

EMF, RFR, and 5G protection
Providing 36 dB of shielding at 40 GHz.

The fabric
The BlocSilver® fabric shields against EMF, RFR and 5G,
with up to 36dB of EMF shielding at 40GHz.
BlocSilver® fabric is durable, breathable, lightweight and antibacterial.

Attenuation: 10MHz – 40GHz 36-56dB.

*Silver products discolor over time and can be stained from the factory.
If you don’t want any discoloration, please choose a canopy made from Swiss Shield® fabrics.

The design
This tent is a less expensive alternative to a full-framed four-poster EMF bed canopy and EMF mat.
The tent is designed to be used on top of the mattress or with the mattress placed inside the tent.
The tent uses BlocSilver® EMF fabric for the body and silver twill on the base.
An EMF protective bed mat is integrated into the tent creating a Faraday cage sleep solution.

The BlocSilver® tent is manufactured to high-quality standards,
and is available in a range of sizes to fit bed frames and mattresses.

Measure to get the right size tent
The tent sizing is based on mattress dimensions.

BlocSilver® Faraday Cage
BlocSilver® fabric is conductive.
This tent has an integrated silver base which makes it a complete Faraday cage.

How to setup your tent
Unzip the carrying case, and remove the EMF protection tent and poles.
Taking one of the two poles,
gradually begin to feed it through the outside tunnel
that runs diagonally across the body of the EMF tent
Connect the parts of the pole as you go.
The second pole will run through the opposite tunnel
The poles will crisscross at the top.
Secure the poles with the ties.
All four corners will connect into a casement attached to each corner of the base.

Where to place your tent
Place the tent on top of the mattress, on the floor
on top of the bed base with the mattress inside
Or if the bed is small enough and only has a base,
place the entire bed inside the tent
Any of these placements will create a Faraday cage bed.

Getting into the tent
Unzip the tent, taking care to keep the flaps away from the zipper.
Once inside the EMF tent, zip it back up slowly.
Manoeuvre the overlap flap to secure the zipper.
This step is important for ensuring the zipper area is sealed.

Grounding options
Ensure the tent is properly grounded.
Grounding your EMF tent is essential because the surface is conductive.
This can attract electric fields from house wiring and electrical appliances.
You can ground the tent with our grounding kit that includes a plug, a cable, and a screw plate.

If you want to prevent potential residue from dirty electricity,
you can add Dirty Electricity Filters to your bed area.
You can buy Dirty Electricity Filters here.

Canopy Grounding Kit

230.00 AED

EMF/RFR Protective Bed Mat

540.00 AED – 1270.00 AED

Sizes
Single 110 x 210, Double 140 x 210, King 160 x 210, Super King 190 x 210, Super King Long 190 x 225

Questions
How do I test that it’s working?
If you have an EMF / RFR detector, you can test the levels inside the canopy.
You can buy detectors here
You can also test the effectiveness of the canopy by using it.
Sleep inside the canopy. Assess your sleep quality and how you feel sleeping with EMF/RF protection.

Does it come with a warranty?
Yes, two years of like-for-like replacement subject to use and misuse.
For example: tears due to misuse or not following washing instructions.

Can I return it?
Please contact us for returns.

Do you offer support?
Yes. We provide free technical support and advice from experienced EMF shielding experts.

Will this protect against 5G?
Yes. BlocSilver fabric provides 34 dB of shielding at 40 GHz.

Can I wash the canopy?
BlocSilver is washable. To maintain full shielding strength it can only be washed up to 40 times.
Wash gently without detergent, do not tumble dry.

Can this canopy be earthed?
Yes. We sell the grounding kit here Canopy Grounding Kit

Do I need under-bed protection?
This depends on your individual circumstances and levels of EMFs in your home.
You can buy the under-bed mat here EMF/RFR Protective Bed Mat

Why is my canopy not working or making me feel worse?
1. The airflow is restricted: Open one quarter where EMF intrusion is weak.

2. The canopy is not earthed properly: Check and secure earthing.

3. The earthing carries dirty electricity: Check and secure earthing.

4. There are gaps between the mat and canopy that don’t touch: Check and secure positioning.

5. Metal inside the mattress: Check the canopy with another mattress or change the mattress.