Polar Air Purifier And Ionizer

3,675.00 AED

Installs Inside HVAC System
Each Unit covers up to 2,400 sq. ft.
Stack Units For Larger Areas
Sanitizes: bacteria, germs, mold and more
Purifies: pollutants, odors, PM2.5, spores and more
Safe & Hypoallergenic: No chemicals, no deodorizers, no ozone
Proprietary Technology Polar Ionization
Filterless Simplicity: zero replacement parts
Efficient Energy Use
Professional Installation Recommended
FREE Virtual Electrician Consultation Available Upon Request

Quantity
Minus Quantity- Plus Quantity+

The Polar Air Purifier And Ionizer For Large Areas

Clean your air of allergens, contaminants and more with this large area air purifier that connects to any HVAC system.

This filterless central air purifier is ideal for bigger building air purification and surface sanitation.

The units can be stacked to purify the air in residential or commercial spaces of any size.

Coverage Estimate: 2,400 sq. ft.

Silent: Adds no audible noise to your existing HVAC system

Replacement Parts: zero for product life

Compact design: fits into almost any type HVAC system

Zero Ozone: Intertek tested 8 hr TWA Ozone for this product is 0.000 ppmv when tested in a 30 m3 chamber

Efficient Energy Use: The Whole Home system only requires about $1 of electricity per month (if used 24/7)

Installation Requirements: Due to electrical components, we recommend that you hire an electrician or smart home installer for approximately 60 minutes.

Includes optional FREE Virtual Electrician One-on-One consultation available upon request.

Includes optional FREE One-on-One consultation with an Air Quality expert, available upon request.

Specifications

Weight: 1.2 lbs

Dimensions: 10 × 5 × 2 in

Model Standard, 24 VAC, Residential, 110-220VAC, Compact, 100-240VAC

The BP-2400 comes with a 30 day money back guarantee

Where Does The Whole Home System Install?

There are many variations of HVAC systems in the USA and around the world.

The Polar Air is compact enough to fit into any system that we have seen that covers over 1,000 sq. ft.

It simply installs inside your ductwork, typically magnetically attached to the blower.

NOTE: This unit has a maximum temperature of 150 degF operating temperature, meaning that it should be installed BEFORE the furnace.

The HVAC system in your home consists of various components, including the air handler, ductwork, and the outdoor unit, which is known as the condenser. The condenser is typically located outside the house and is responsible for releasing heat that’s been absorbed by the HVAC system from inside your home. It does this by using a refrigerant to transfer the heat from the indoor air to the outdoor air. The refrigerant circulates through a set of coils in the condenser, which are cooled by a fan blowing air over them. It’s a common and very understandable misconception that our Whole Home system installs on that “giant box fan” outside your home. That system though is typically what’s called a “condenser” and is only used for energy exchange, not airflow. Our Whole Home System may be installed near the air filter that you change regularly or blower inside the house, which may be located in a closet, attic, or basement. This allows the system to effectively treat the air as it flows through the HVAC system before it is distributed throughout the home.

The condenser is not directly connected to the inside air of your home. Instead, it only works to cool the refrigerant that has absorbed heat from the indoor air. This means that the outside air that’s being blown over the condenser doesn’t mix with the inside air of your home. While the condenser itself doesn’t directly affect the indoor air quality of your home, it’s an essential part of your HVAC system that helps to regulate the temperature and humidity levels inside your home. If the condenser isn’t functioning properly, it can impact the overall performance of your HVAC system, resulting in higher energy bills and reduced comfort levels.

Third Party Testing

Third-party testing indicates that devices with the Polar Ionization™ technology have proven effective at helping reduce Mold, Bacteria, PM2.5, SARS-CoV-2, E. Coli, MRSA, C. Difficil, VRE, TB (M Terrae), and more. These studies are often in controlled laboratory environments or through commercial 3rd party partners. Results will vary due to many real world variables including humidity, contamination concentrations and types, air flow, altitude, temperature, and more.

Wide Coverage

Coverage estimates are based primarily upon our 10+ years of experience with clients and their real world environment and goals. Various lab, third party, and real world studies have shown varying speed and efficacy in different room types and sizes. Recommended coverages are for average contamination levels in residential spaces. Results will vary due to many real world variables including humidity, contamination concentrations and types, air flow, altitude, temperature, and more.

Virtual Electrician Consultation And Assessment

Virtual electrician consultations are available upon request.

Assess your space with the help of an expert and get the right air purification solution for you.

We Provide Solutions For Every Situation

image-1

Residential

icon item-1

Bedrooms & Nurseries

icon item-2

Kitchens

icon item-3

Pets and Allergies

icon item-4

Cars & Travel

icon item-5

Whole Home

image-2

Commercial

icon item-1

Resorts & Casinos

icon item-2

Aerospace

icon item-3

Food Industry

icon item-4

Office Buildings

icon item-5

Energy Sustainability

image-3

HVAC

icon item-1

Air Handler Solutions

icon item-2

In-Duct installations

icon item-3

PTAC, VTAC, and more

icon item-4

Any size building

icon item-5

Ice Machines

image-4

Medical

icon item-1

Mold Sensitivities

icon item-2

Microorganisms

icon item-3

Medical Facilities

icon item-4

First Responders

icon item-5

Dynamic Purification

error: copy protected

Hello! How can we help?

This chat will open in your WhatsApp.

10:33